decorare le saponette con le decal ad acqua

Everyone can use a bar of soap as a present so why not make your own bars extra special with some nudity? Spread the love!

Remove these ads by Signing Up

Step 1: Find images and print them onto decal paper.

The images you will have to find on your own, but as for the decal paper, you just get some from here. A ten-pack of the white should be good enough for about 80 bars of soap.

Get some bars of soap that have a flat face and measure to see what your work area is. Resize and crop your image to fit.

When you get the transfer paper, just put in in your inkjet printer and print it out.

Step 2: Spray some clear coat

Apply 2-3 coats of some acrylic clear coat from a spray can and wait 60-90 minutes for it to dry.

Step 3: Trim to size

Cut out the picture. If you're feeling lucky, try to round the corners.

Step 4: Dunk in water

Drop the decal into a glass of water for about 45 seconds. The backing will become loose and the decal will come off easily.

Step 5: Apply decal to soap

If you're in a rush and have steady hands you can apply the decal onto a dry bar of soap.

If you want to be able to have some leeway and be able to reposition the decal, wet the soap a little bit first.

Apply the decal onto the soap and press out the air bubbles.

Step 6: Give the gift of love and happiness

Tie it up with a bow, wrap it in some fancy paper, or simply toss it to your roommate and shout "merry freakin' holidays!"

Customize the images to your friends if you want or just mix them up and when your friends call to thank you you can try to figure out which one they got.

Here's to closing out the year with class and style.

personalizzare una chitarra con le decal ad acqua

Step 1: What I started with. . . .

Ok, so what he got given, basically, was a sad, neglected orchestra size classical acoustic, unknown brand. Was missing a couple strings, missing the knob off of one of the tuners, the machine heads were kinda mucky (and cheap anyways), the neck had a backwards bow, dried fretboard, and with some finish issues. Not BAD, in fact, great size for him, the finish issues didn't affect the sound, and hey, it was FREE! So, with the help of an online auction site my quest to fix it up began.
This is kind of what I started with, I didn't think to take a picture before adding a pick guard but you get the idea. (It didn't have one, no biggie, but I thought it might be a good thing to add.)

Step 2: Assessing the cracks.

It had 6 cracks in the finish, probably from being in a storage unit, or from temperature changes, who knows. But even though they didn't affect the playability I started thinking of ways to cover them up, but needed a way that would not affect the sound. Also, since this was a free guitar, and for a beginning player who is 9, it really was not worth it to me to completely strip the finish (it's polyurethane so that would have been a pain in the rear anyways!) and refinish. Or take it to a luthier or anything like that.

Step 3: Devising a plan

So, after much, much research online I came up with "waterslide" decals. If you ever did models you would know them as those really, really thin decals that you soak in water and then the decal slides off of the paper backing and when it dries it is stuck on the item you slid it on.
They're not completely permanent so I had to think of a way to make them so also.

Since I needed decals that would work for my specific needs, so I decided to design my own. I taped paper to the guitar so I could draw them to cover the cracks.
The way the cracks were kind of made me think of creatures or something crawling around the guitar so I "went with that" and the creatures became dragons, and so the rough sketching took place.

Step 4: Completing the sketching.

Kind of self explanatory, got the dragons sketched out in a way that made me happy and also got my son excited.

Step 5: Coloring

I let my sons both pick and agree on the colors to make the dragons. Then colored them in, and touched up and finished the drawings till I was happy with them.

Step 6: Creating the decals

Next step was to copy the drawings on to ink jet water-slide decal paper. This was then coated with Krylon Acrylic Crystal clear coat and allowed to dry overnight.

Step 7: Applying to the guitar

I then sanded down the poly coat for two reasons. 1)And the most important, so that the Nitrocellulose coats I would be adding on top of the decals would have a better surface to "grab" to, and 2) since I knew I would be adding coats then the less already on the guitar the better. (This is why this picture looks all dull and flat.)

I applied the decals and then let them dry for 24 hours.

Step 8: Finishing it up.

Now for the nitro lacquer. I found nitro at Lowes, they sell a spray type made by Deft. It does not say on the can that it is nitro, however if you look on the brands website you can confirm that it is. Although, I would imagine any kind of clear coating finish would do, I chose nitro because it is known for being thin, and for me thinner is better since there was already poly on it.

You have to start out spraying VERY lightly, like a very, very light "dusting" and letting that DRY about an hour so you do not disturb the decals and cause them to peel up, or crinkle, or such. Again, I got most of this info from various places online and I am thankful for this warning because I had no problems at all. :)

I added enough Nitro so that I could safely add about 2 normal coats without fear (always an hour between coats). I then let this sit and cure for a week.

I then VERY carefully sanded down the nitro. I did this to make a smooth surface on the guitar, so there would be no ridges around the decal, because even though they are thin they still were more raised than the rest of the surface obviously. This basically left barely anything over the decals themselves and brought the rest of the face "up to" the same level.

I then sprayed two more "normal" coats (hour dry time in between) over the face of the guitar so that the decals would be nicely  "buried".

Again, another week long cure.

After that I gave it a good wet sanding, working from 400-800-1000-1200-1500-2000 grits. Then used 3M Finesse It to bring it to a nice glossy shine.

I wish I could get better pictures to really show the glossy shine it has now, as well as how well the decals turned out. They almost look drawn or painted on as you can't see any ridges around them. It's cool since they are in-between layers of finish they almost have a 3D-ish effect as well.

For how time consuming, and how bad my arm still hurts from all that sanding, I think it was still very much worth it. Even though, unfortunately, you can still see those darn cracks underneath! Agh! But at least there is a distraction to keep one from focusing on them. :)
And the guitar actually has a nice "richer" sound to it, I am ECSTATIC that it actually sounds BETTER.

Step 9: Finishing touches.

Then all there was left to do was change out the cheap gummed up Taiwanese machine heads, for an economy Gotoh machine head set.
Adjust the truss rod to fix the bow.
Check action and intonation. (yay for online guides)
Used lemon oil on the fretboard and made it all nice and "healthy" looking again.
And for good measure I added a guitar strap button.